STEP 1
Facility review
We look at what is installed, which parameters are critical and where the losses are today.
At your facility or remote
Field, crop store and pump house in one system
LoRaWAN covers large areas with no cabling and no mobile connection on each sensor. A single base station collects data from the whole farm.
up to 10 kmrange from one base station
yearsof battery life per sensor
no cablinginstallation on remote plots
Control points
What we monitor in agriculture
The sensors run for years on a battery, so they can go where nobody will drive out every day.
Soil moistureData per plot, for decisions about irrigation and fieldwork.
pH and conductivitySoil condition monitored without driving out to every point.
Air temperature and humidityConditions in crop stores, sheds, greenhouses and at the grain elevator.
Irrigation pumpsConfirmed starts, running outside the schedule, emergency stops.
Tank levelsFuel, water and crop-protection chemicals: liquid level and distance to the surface.
Diesel generatorsRunning hours, failed starts, fuel use and refuelling.
Energy and water meteringConsumption across the farm's facilities.
Access and eventsOpenings of stores, fuel tanks and plant rooms.
One base station instead of a connection on every sensor
We will calculate the coverage from your map of facilities.
How it works in practice
Situation and system response
Situation
What the system does
What you get
A pump runs overnight with no job to do
The start and the consumption are both recorded
Wasted fuel and wear are removed
The fuel level in a tank drops unevenly
The level chart shows when it changed and by how much
The situation is reviewed from the data
The temperature in a crop store is rising
An alert arrives before any produce is lost
A response the same day
Facilities are scattered across the district
A single base station covers a radius of up to 10 km
No connection needed on each sensor
Proof
Screens from live facilities
Already running at
agricultural holding
pig farming and food production group
{{TODO: descriptor for Capro Oil}}
Deployments to date are largely in Ukraine.
Rollout
From pilot to full coverage
STEP 2
Pilot on 5-10 points
A gateway, sensors and meters on the riskiest zones. Installed without stopping operations.
A few hours per facility
STEP 3
Dashboards and reports
We draw up the facility plan, set the limits for each point, the alerts and the report formats.
Shaped around your processes
STEP 4
Scaling up
The same kit across the remaining zones and facilities, with a single view for the whole company.
No new approvals needed
Next step
We will work out the coverage for your farm
Send us a map of your facilities and the distances between them. We will work out how many base stations you need and which sensors to install first.
- CompanyPolymetrica LLC
- E-mailsales@polymetrica.net
- Websitepolymetrica.net