STEP 1
Facility review
We look at what is installed, which parameters are critical and where the losses are today.
At your facility or remote
ESOS and SECR: evidence is easier to collect than to reconstruct
Both regimes come back to one question: where does the energy actually go? A meter at the incomer answers "this much in total". Sub-metering by zone and by equipment answers the question that is being asked, and keeps answering it between compliance cycles.
by zoneconsumption split, not one facility total
continuousdata between cycles, not a snapshot
XLS / PDFexport for your assessor
What is measured
What the assessment asks for, and where the data comes from
ESOS is an audit obligation on large UK organisations. SECR puts energy and emissions into the annual accounts. Both reduce to the same thing: a defensible breakdown of consumption, and neither is satisfied by a single figure from the incomer.
Consumption by zoneProduction areas, cold rooms, offices and lighting, split rather than totalled.
Consumption by equipmentCompressors, refrigeration, HVAC and pumps, each on its own meter.
Interval dataConsumption over time, so a night-time baseline is visible rather than inferred.
Off-shift baselineWhat the facility draws when nothing should be running.
Water, gas and heatMetered on the same platform as electricity.
Several facilities comparedThe same breakdown at each one, so outliers stand out without a visit.
Export for the assessorXLS and PDF for any period, per point or per facility.
Unbroken historyThe record continues through a power cut, so the year has no gap in it.
We provide the measurement and the reports. We are not an ESOS lead assessor, we do not sign off assessments and we do not file SECR disclosures: your assessor and your accountants do that. What we remove is the part where energy data has to be reconstructed from invoices months after the fact.
An assessment is only as good as the data underneath it
Metering installed now produces the evidence for the next cycle.
Requirement and response
What is asked for, and what you hand over
What is asked
What the system provides
What you hand over
An assessor asks where the energy goes
Consumption split by zone and by equipment for the period
A breakdown rather than an estimate
The report needs a year of data
History is continuous from the day the meters go in
No reconstruction from invoices
A recommendation has to be justified
Before and after on the same chart
Evidence that the measure worked
Several facilities in the group
The same breakdown at each one, compared side by side
Outliers visible without a visit
Proof
Screens from live facilities
Already running at
ArcelorMittal
Swiss Krono
national grocery chain
supermarket chain
online retailer with fulfilment centres
steel pipe and railway wheel manufacturer
Deployments to date are largely in Ukraine.
Rollout
From pilot to full coverage
STEP 2
Pilot on 5-10 points
A gateway, sensors and meters on the riskiest zones. Installed without stopping operations.
A few hours per facility
STEP 3
Dashboards and reports
We draw up the facility plan, set the limits for each point, the alerts and the report formats.
Shaped around your processes
STEP 4
Scaling up
The same kit across the remaining zones and facilities, with a single view for the whole company.
No new approvals needed
Next step
We will meter what the assessment will ask about
Send us your list of consumption groups. We will propose where to meter first, so the next cycle is a data export rather than a project.
- CompanyPolymetrica LLC
- E-mailsales@polymetrica.net
- Websitepolymetrica.net