STEP 1
Facility review
We look at what is installed, which parameters are critical and where the losses are today.
At your facility or remote
Control: equipment runs to a schedule, not to habit
Relays and controllers sit on the same network as the sensors. Equipment starts on a schedule, on an event, or by hand from a phone - with no trip to the facility.
on eventautomated emergency responses
on scheduleequipment runs to a timetable
remotelyfrom the web and from a phone
Control points
What you can control
Control sits on top of monitoring: the system sees a reading and can act on it.
Refrigeration unitsFreezer and chiller rooms, operating modes.
Air conditioningSplit systems, fan coils, air curtains.
VentilationSupply and extract systems, on a schedule or on a reading.
Condensing unitsControl of racks and operating modes.
Diesel generatorsControl of start-up and power switchover.
PumpsStarted by level, by pressure or by schedule.
HeatingBoilers, water heaters, heating circuits.
LightingIndoor and outdoor, following the facility's working hours.
Equipment that runs when it need not is paying your bill
Schedules and automated responses remove that without anyone having to intervene.
How it works in practice
Situation and system response
Situation
What the system does
What you get
The facility is closed but the equipment is running
The schedule switches lighting and HVAC off outside working hours
Overnight waste is gone
Something goes wrong at the facility
An automated response shuts equipment down or switches it over with no one involved
A response in seconds
Settings need changing at several points
They are set remotely from the platform
No service call-out
Staff change setpoints by hand
Every change is recorded in the event log
You can see who changed what, and when
Proof
Screens from live facilities
Already running at
supermarket chain
grocery chain
2 ice cream manufacturers
cinema chain
{{TODO: descriptor for Mr.Grill}}
Deployments to date are largely in Ukraine.
Rollout
From pilot to full coverage
STEP 2
Pilot on 5-10 points
A gateway, sensors and meters on the riskiest zones. Installed without stopping operations.
A few hours per facility
STEP 3
Dashboards and reports
We draw up the facility plan, set the limits for each point, the alerts and the report formats.
Shaped around your processes
STEP 4
Scaling up
The same kit across the remaining zones and facilities, with a single view for the whole company.
No new approvals needed
Next step
Let us work out what is worth automating at your facility
Show us your equipment list and we will identify what can move onto schedules and automated responses in the pilot itself.
- CompanyPolymetrica LLC
- E-mailsales@polymetrica.net
- Websitepolymetrica.net