POLYMETRICA Request a facility review
Polymetrica/Industry/Logistics

A cold chain with no broken links

Distribution centres, cross-docking and hubs: storage conditions, discipline at the loading bays and the readiness of your backup power, with one record across every facility.

24/7cover at night and at weekends
every facilityin one combined view
recordsfor handling claims
Distribution centre: zones, temperatures, loading bays
Control points

What we monitor in logistics

At every handover the goods change owner and change whose responsibility they are. The data shows exactly which link in the chain broke.

Cold room temperatureFreezer, chiller and climate zones across the DC.
Bays and doorsHow long doors stay open, and what that does to the temperature in receiving.
Receiving and dispatchConditions in the areas where goods stand longest unattended.
Diesel generatorsRunning hours, failed starts, start-up delay, fuel consumption.
Power qualityVoltage and phases at the intake, switchover to backup.
Energy meteringConsumption by zone, by refrigeration plant and by lighting.
FloodingLeaks in storage areas and plant rooms.
Access and eventsAccess control, area openings, and how staff responded to alarms.

One break in the cold chain costs more than the system

A pilot at one facility shows you exactly where it happens.

Request a facility review
How it works in practice

Situation and system response

Situation
What the system does
What you get
A door was left open for 40 minutes
The system records the time and the temperature rise in receiving
A conversation with the contractor based on numbers
The facility loses mains power
Switchover to the generator and the actual start are both monitored
The backup really works, rather than being assumed to
A claim about the condition of a load
The hour-by-hour record shows the conditions in every zone
Responsibility is settled from the data
Several facilities in different cities
One combined screen showing the state of every facility
Management sees the network, not a stack of separate reports
Proof

Screens from live facilities

Sensors and meters with current values and statusesDeviations
Already running at
logistics operator {{TODO: descriptor for Transvit}} {{TODO: descriptor for Neptune}} online retailer with fulfilment centres agricultural holding

Deployments to date are largely in Ukraine.

Rollout

From pilot to full coverage

STEP 1

Facility review

We look at what is installed, which parameters are critical and where the losses are today.

At your facility or remote
STEP 2

Pilot on 5-10 points

A gateway, sensors and meters on the riskiest zones. Installed without stopping operations.

A few hours per facility
STEP 3

Dashboards and reports

We draw up the facility plan, set the limits for each point, the alerts and the report formats.

Shaped around your processes
STEP 4

Scaling up

The same kit across the remaining zones and facilities, with a single view for the whole company.

No new approvals needed
Next step

We will bring every facility into one picture

We start with one DC: control points, reporting and alerts. Then we connect the remaining facilities with the same kit.

Request a facility review

Just a few lines is enough. We will prepare a preliminary estimate and an equipment list before we talk.

Name and contact are required. Everything else is optional.

Your name, then a comma, then your company. For example: Maria Santos, Acme Foods

An email address such as name@company.com. Or a phone number with the country code, starting with a plus sign, for example +44 20 7123 4567 or +49 30 1234 5678.

Where the facility is, which may not be where you are. It tells us which rules apply and who picks the enquiry up.

For example: a DC with 6 cold rooms, two loading bays, a diesel generator, one view across three facilities

We reply within one business day. We never share your details.

If the security check does not load, or you would rather not use this form, email us at sales@polymetrica.net - it reaches the same team.